100W FM, Exciter/Transmitter
The AFM-100 has one of the industry’s clean exciters and an ultra-low distortion modulator for which go to make it a highly stable FM transmission system. Clean and market leading audio performance that will crush the competition.
1U 19” rack unit
3.9 inch TFT display
Rotary encoder
0-100 W adjustable RF output
FM receiver built-in
Powerful ALC circuitry
Remote interface
Antenna fault protection
Slow rising RF output
RF Power timer
Audio Squelch (10-999 sec)
Password protection
Real time Log
Low RF, Low MPX, High temperature,
High SWR, VCO lock alarms
10/50/100kHz tuning steps
RDS built-in (opt.)
Audio monitoring through TCP-IP,
UDP (opt.)
AES/EBU input (opt.)
TECHNICAL SPECIFICATIONS
Frequency 87.5 -108 MHz
Modulation FM, 75kHz peak (180KF3E/256KF8E)
PLL Tuning Steps 10/50/100 kHz
Audio input level -3.5 to +12.5dBm @75kHz deviation
Ext. MPX input level -3.5 to +12.5dBm @75kHz deviation
AUX input level SCA, -12.5 to +3.5dBm @7.5kHz deviation
RDS, -24 to -8 dBm @ 2kHz deviation
Modulation distortion < 0.03%, @75kHz dev.
MPX input Freq. Response ± 0.1dB, 30Hz-100KHz
Pre-emphasis 0 (FLAT), 25,50,75 uS selectable
Rated RF output power 100W continuous
RF power ALC stability ±3
RF output connector N type 50Ohm
Audio freq. response 30-15kHz, ±0.1dB
S/N Ratio, Mono operation 30-20kHz, >78dB
CCIR, >81dB
S/N Ratio, Stereo operation 30-20kHz, >75dB
CCIR, >80dB
Harmonic & spurious <70dB harmonic, <80dB spurious
Power supply Single phase, 90-264VAC, 50/60Hz
Power consumption @100W 135W max.
Efficiency >75%
Operational temp. range 0 to 35°C (-10 to +45°C extreme)
Dimension (WxHxD) 483x44x375 mm
Weight 5,5 kg